1. Extruded feed pellets/Soften feed pellets:
300kg/h fish feed pelletizer machine is used to produce different shapes extruded feed pellets for fish, shrimp, crab. And the diameter of processing feed pellets is φ0.3-12mm.
2. Sinking/floating feed pellets:
Aquafeed formula available with 10% starch content
Ensure the hardness, crush resistance and water resistance stability of pellet feed
Prevent water pollution, pasteurization
Attractive taste, no waste
the rate of floating over 95%, more than 1-6hours
1. Made of stainless steel, easy to maintenance
2. Easy to operate, low voice
3. Dry type manufacturing process, adopt self-heating, no steam system required
4. Screw is designed in having self-cleaning function, can exchange the raw materials anytime.
5. Control system can directly control the feeding speed, also control the capacity
6. No adhesive is required for processing floating feed, and it can maintain stability in water for more than 2 hours.
7. can process 3-12 mm round products (templates are made as required).
8. The main shaft is a combined structure, and the spare extension shaft can adapt to the expansion processing of different raw materials.
|Main Shaft power||22KW||37|
1. Fish feed pelletizing machine is suitable for feeding fish, shrimp, frog, pig, duck and so on. The puffed feed produced by the fish feed puffing machine has puffed softness, high protein, complete nutrition, and floats on the water for a long time without pollution and waste, and promoting the rapid growth of fish.
2. Mix wheat husks, corn flour, pea cedar, fish meal, etc., add a compound premix, add 5-9kg of clear water per 50kg according to the formula, put in a feed mixer, mixing about 3-5 minutes, puts the oil material into the storage bucket, and add the oil materials to mixer. Pay attention to control the storage tank to close.
3.Cut granules, the size of the granules is determined by the outlet holes. The small motor can be adjusted back and forth.
4. After finishing extruded, disassemble the front section of the cutting ststem, use the tool hook to immediately disassemble the extruder ro clean